Painting a custom TIE Avenger mini for X-Wing

http://cinziamazzamakeup.com/?x=cialis-generico-teva IMG_2347

see url I love X-Wing Miniatures Game.

watch Considering TIE Fighter is one of my favorite video games of all time, it’s no surprise that I love the tabletop game.

how to make viagra at home Unfortunately, my favorite ship from TIE Fighter isn’t in X-Wing.

source It hasn’t been produced by Fantasy Flight Games for X-Wing. Called the TIE Advanced in the video game and later referred to as the TIE Avenger (Darth Vader’s TIE is technically the “Advanced”), the ship isn’t among the game’s roster of Imperial fighters.

source url So I went and found one.

watch Over on 3D printing website Shapeways, designer Mel Miniatures has uploaded designs for dozens of ships (as well as many pieces for Star Wars: Armada). Some are pieces Fantasy Flight hasn’t released, but many are ones they never will mainly because they’re from an era they won’t touch (Clone Wars, prequels, Old Republic) or some because they’re way too big (they have an epic Nebulon B frigate for $350).

source site They also have a series of turbolaser batteries, mines and ground forces. And they have a few ships from other franchises designed at X-Wing’s scale.

source url Check it out here.

extenze vs viagra I’ve been eyeballing the TIE Avenger for quite awhile, and I picked up a pair last week.

http://buy-generic-clomid.com I ordered them in strong white plastic rather than the more expensive, but better detailed, “frosted detail” option.

http://acrossaday.com/?search=prednisone-discount-rx-at-walmart This is how they look up close to a TIE Interceptor:

IMG_2326

And from above:

IMG_2327

You can pretty easily see the striations and grain from the 3D printing process, and some small details are actually completely lost. (The bars across the front canopy are the most egregious of these lost details.)

But hey, who cares? I want them to look cool on the table.

So I got to painting.


 

IMG_2330

First, I primed them in a matte black.

They already look better.

I had to do a couple coats, but I also had to make sure not to spray too much because I didn’t want to lose any more detail.


 

Now for painting details on the ship.

The good thing about TIE Fighters is that there isn’t a whole ton of painting and crazy detail that goes into it.

I essentially used four colors: the matte black, a blue-grey for all-over coverage, a dark grey for the canopy detail and two tiny dabs of red for the lasers.

If you didn’t know, TIEs have been seen in two colors, a blue-grey and a white-grey. I like the blue-grey better, and I like it a little more blue and a little darker than what’s on the ships in X-Wing’s line.

I typically use P3 paints, and I used one part Cygnar Blue Highlight, one part Morrow White and two parts Bastion Grey to get the blue-grey color I liked.

IMG_2331


 

IMG_2333

Painting it was easy. First, I painted up the main parts of the ship and then did the edges around each wing panel.

The edges took a good amount of time, and it was made a bit harder by the lack of detail in the wings due to the material.

But it was pretty easy.


Next was the detail parts. Also pretty easy.

First off, I did a dark grey around the canopy on the front. I had to paint in some of the lines since they didn’t really exist on the ship.

Then two tiny dabs of red on the laser canons below the canopy.

Finally, I did an all over wash with Citadel’s Nuln Oil to dirty the thing up.

IMG_2335


 

So, the material looks a little grainy, right?

Yeah, but it’s going to be fine when it’s sitting on the table.

It’s pretty different when it sits directly next to an official FFG ship and looking up close, but you probably won’t notice when you’re playing.

From the side:

IMG_2347

And from the top:

IMG_2344

See? Looks pretty dang sweet.


 

Have you bought pieces like this? Or custom painted X-Wing minis?

Tell us about it in the comments.

 

2 Comments

Add a Comment

Your email address will not be published. Required fields are marked *